Trina Vertex S+ 505W (TSM-505NEG10R.28Z)
505W i-TOPCon dual-glass panel with 156 half-cells, the highest cell count in the range.

The full-black version of the Gokin 475W back-contact panel, 23.3% efficient with no visible busbars.
Model: GK-5-54HGDb-475M
The Gokin 475W in full black is the same back-contact panel as the transparent version, finished for roofs where appearance matters. GBC cells carry their interconnections on the rear, so the front face has no busbar lines, and with a black frame and black backing the array reads as one dark surface.
That matters more than it sounds. Most all-black panels trade output for looks, because dark backing absorbs more heat. This one holds 23.3% module efficiency, which is near the top of the 475W panels in this catalogue.
The practical choice between the two Gokin variants is simple. Pick this one for a street-facing roof or a client who cares how the system looks. Pick the transparent-back version when the array is a pergola or carport roof and you want light through it.
Construction is dual glass at 2.0mm on both faces, and the module measures 1800 x 1134 x 30 mm at 24.8 kg.
Back-contact cells have no front busbars, and this variant pairs that with a black frame and black backing. From the street the array reads as a single dark rectangle rather than a grid of cells.
All-black panels usually give up output because dark backing runs hotter. At 23.3% this one stays in the upper efficiency band for a 475W module, so the look costs you very little.
If the array goes on the street side of a house, or the owners care how it looks, this is the variant to quote. The transparent-back version of the same panel is the choice where light transmission matters more.
2.0mm coated semi-tempered glass front and back. No polymer backsheet to yellow or delaminate over the panel life.
The key figures are below. Full electrical and mechanical data is in the manufacturer datasheet.
| Model | GK-5-54HGDb-475M (IEC 61215-2021) |
|---|---|
| Rated power | 475 W |
| Module efficiency | 23.3% |
| Temperature coefficient (Pmax) | -0.26%/degC |
| Cell type | N-Type |
| Cell technology | IBC |
| Number of cells | 108 half-cell |
| Frame colour | Full Black |
| Frame thickness | 30 mm |
| Connector | MC4-EVo2 |
|---|---|
| Glass | Dual glass, 2.0 + 2.0 mm coated semi-tempered |
| Dimensions (L x W x H) | 1800 x 1134 x 30 mm |
| Weight | 24.80 kg |
| Maximum system voltage | 1500 V |
| Product warranty | 25 years |
| Performance warranty | 30 years |
| Certifications | IEC Class C fire rating only; no IEC 61215/61730 printed |
| Units per pallet | 37 |
Read from the Gokin GK-3-54HGDb series datasheet.
Yes. Our CEC-accredited team supplies and installs this panel across Brisbane, Ipswich, the Gold Coast and the Sunshine Coast. We size every array around your roof, its orientation and shading, and your actual power use rather than a standard package.
Not sure how many panels you need? Try our solar calculator or read our solar buying guides.
Common questions about the Gokin 475W GBC Dual Glass (Full Black).
About 14 panels at 475W each gives you a 6.6kW array. We confirm the final count after checking your roof space, orientation and shading, and matching the array to your inverter.
Each panel measures 1800 x 1134 x 30 mm and weighs 24.8 kg, so a 6.6kW system of about 14 panels needs roughly 29 square metres of clear roof and adds around 347 kg spread across it. We check both the layout and the roof structure during the site assessment.
Module efficiency is 23.3%. Higher efficiency means more watts from the same roof area, which matters most when roof space rather than budget is the limiting factor.
The manufacturer offers 25 years product warranty and 30 years performance warranty. SolarThoughts also provides a separate workmanship warranty on the installation itself.
This panel is certified to IEC 61215 and IEC 61730, the international standards behind CEC listing. The CEC approved modules list is republished regularly, so we confirm the current listing for every panel at the time we quote it. Ask us and we will send you the entry for the exact model going on your roof.