Risen 475W TOPCon Bifacial (RSM96-11-475BNDG)

The highest-efficiency panel in the range at 23.8%, bifacial with 80% rear-side gain.

Rated power 475W
  • 23.8% efficiency, highest in this catalogue
  • Bifacial with 80% bifaciality factor
  • 96 half-cells, n-type TOPCon
  • 25-year product, 30-year performance warranty
  • CEC-accredited installers
  • Brisbane, Ipswich, Gold Coast and Sunshine Coast
  • Workmanship warranty included

Model: RSM96-11-475BNDG

Overview

What makes the Risen 475W TOPCon Bifacial a strong choice for your roof?

The Risen RSM96-11 475W is the highest-efficiency module in this catalogue at 23.8%. On a constrained roof that is the specification that decides how much system you can fit.

It is also properly bifacial, and Risen is one of the few manufacturers here that prints the bifaciality factor rather than just the word. At 80%, the rear face can generate up to four fifths of the front output under good reflection, which makes this the panel to specify for flat roofs with light-coloured membranes, carports and tilted ground mounts.

Construction is 1.6mm AR-coated heat-strengthened glass at the front over 1.6mm at the rear. The coating lifts front-side capture while the rear glass is what makes the bifacial gain available at all.

Warranty is 25 years on product and 30 years linear power, with a -0.29%/degrees C temperature coefficient.

The most efficient panel we stock

23.8% module efficiency puts this at the top of the range, just ahead of the Trina Vertex S+. On a roof where every square metre counts, this converts the most of it.

80% bifaciality, a figure most datasheets omit

Risen prints the bifaciality factor, and at 80% the rear face generates up to four fifths of what the front does under ideal reflection. On a light-coloured flat roof, a carport or a tilted ground mount, that is real extra yield rather than a marketing line.

Glass on both faces

1.6mm AR-coated heat-strengthened glass at the front and 1.6mm at the rear. The anti-reflective coating lifts front-side capture while the rear glass makes the bifacial gain possible.

Warranted to 30 years

25 years on product and 30 years linear power warranty, with a -0.29%/degrees C temperature coefficient.

Specifications

What are the technical specifications of the Risen 475W TOPCon Bifacial?

The key figures are below. Full electrical and mechanical data is in the manufacturer datasheet.

Risen 475W TOPCon Bifacial specifications (part 1 of 2)
ModelRSM96-11-475BNDG (IEC 61215-2021)
Rated power475 W
Module efficiency23.8%
Temperature coefficient (Pmax)-0.29%/degC
Cell typeN-Type
Cell technologyTOPCon
Number of cells96 half-cell
Frame colourBlack
Frame thickness30 mm
ConnectorMC4
Risen 475W TOPCon Bifacial specifications (part 2 of 2)
Glass1.6 mm AR-coated heat-strengthened front, 1.6 mm rear
Bifaciality factor80%
Dimensions (L x W x H)1762 x 1134 x 30 mm
Weight21.50 kg
Maximum system voltage1500 V DC
Product warranty25 years
Performance warranty30 years
CertificationsIEC 61215:2021, IEC 61730
Units per pallet36

Verified against the Risen Australia 2026H1 datasheet. Two conflicts flagged.

Risen 475W TOPCon Bifacial datasheet Complete electrical, mechanical and certification data from the manufacturer.
Installation

Can SolarThoughts install the Risen 475W TOPCon Bifacial at my home?

Yes. Our CEC-accredited team supplies and installs this panel across Brisbane, Ipswich, the Gold Coast and the Sunshine Coast. We size every array around your roof, its orientation and shading, and your actual power use rather than a standard package.

Not sure how many panels you need? Try our solar calculator or read our solar buying guides.

Areas we install in

Local CEC-accredited crews, no subcontracted strangers.

Check my address
FAQs

Frequently asked questions

Common questions about the Risen 475W TOPCon Bifacial.

Still have a question? Ask our solar team
How many of these panels do I need for a 6.6kW system?

About 14 panels at 475W each gives you a 6.6kW array. We confirm the final count after checking your roof space, orientation and shading, and matching the array to your inverter.

How much roof space and weight will they add?

Each panel measures 1762 x 1134 x 30 mm and weighs 21.5 kg, so a 6.6kW system of about 14 panels needs roughly 28 square metres of clear roof and adds around 301 kg spread across it. We check both the layout and the roof structure during the site assessment.

How efficient is this panel?

Module efficiency is 23.8%. Higher efficiency means more watts from the same roof area, which matters most when roof space rather than budget is the limiting factor.

What warranty comes with it?

The manufacturer offers 25 years product warranty and 30 years performance warranty. SolarThoughts also provides a separate workmanship warranty on the installation itself.

Is this panel approved for installation in Australia?

This panel is certified to IEC 61215 and IEC 61730, the international standards behind CEC listing. The CEC approved modules list is republished regularly, so we confirm the current listing for every panel at the time we quote it. Ask us and we will send you the entry for the exact model going on your roof.

Compare
View all solar panels